Good Morning 2025

General discussion forum.
User avatar
labradors
Head Chicken
Posts: 1121
Joined: Sat Mar 18, 2017 7:20 pm
x 1149

Re: Good Morning 2025

Post by labradors » Tue Mar 25, 2025 3:02 pm

Sounds like a good deal! We bought a small coop from them a few years ago, just to be used as a "hospital coop" for any sickies. It was good for 2 hens max, despite what their advertising said. Hubby added some hardware cloth to the bottom to prevent any critter from digging under. He also reinforced it in a couple of places, and added a knob so that we could pull the door open if swelled up in the rain. It served its purpose despite being a bit wimpy. In other words, just a warning that you may have to add some upgrades, but that's sometimes easier than starting from scratch.
0

User avatar
Killerbunny
Poultry Guru - total zen level
Posts: 7975
Joined: Sat Dec 12, 2015 12:04 pm
Answers: 4
Location: Brockville
x 10287

Re: Good Morning 2025

Post by Killerbunny » Tue Mar 25, 2025 4:09 pm

lolotsung wrote:
Tue Mar 25, 2025 10:50 am
https://nestera.us/?srsltid=AfmBOoq9Pxs ... YE1VvP-g8EScreenshot_20250325_104614_Samsung Internet.jpg

Has anyone tried this coop? It is on sale for $400 at Peavey. Also there is a bigger drum shaped one.

I am thinking the door will get stuck with dirt. There is no insulation.
What is it made of. If it's metal or plastic beware of condensation so good ventilation is a must. Currently there is no warranty on anything in PM as they are closing. You would need to go back to the supplier.
0
:iheartpto:
Beltsville Small White turkeys.
Mutt chickens for eggs
RIP Stephen the BSW Tom and my coffee companion.
RIP Lucky the Very Brave Splash Wyandotte rooster.
RIP little Muppet the rescue cat.
:turkey:

:bat:

User avatar
lolotsung
Head Chicken
Posts: 1000
Joined: Thu Mar 18, 2021 3:18 am
Location: Caledon
x 858

Re: Good Morning 2025

Post by lolotsung » Tue Mar 25, 2025 4:15 pm

It is made of plastic. So there is less condensation with wooden coops?
0
:broodyhen: :chicks: :feed ducks: :iheartpto:

User avatar
Killerbunny
Poultry Guru - total zen level
Posts: 7975
Joined: Sat Dec 12, 2015 12:04 pm
Answers: 4
Location: Brockville
x 10287

Re: Good Morning 2025

Post by Killerbunny » Tue Mar 25, 2025 6:15 pm

Lots of different considerations. Wood is more difficult to clean but less condensation. Plastic has less insulation properties than wood so hotter in summer and colder in winter. Ventilation is always key though. Personally I wouldn't go for it but my princesses have fully insulated coops with humidity monitors that turn on fans at different temperature combinations. Working on an ammonia sensor driven one right now!
2
:iheartpto:
Beltsville Small White turkeys.
Mutt chickens for eggs
RIP Stephen the BSW Tom and my coffee companion.
RIP Lucky the Very Brave Splash Wyandotte rooster.
RIP little Muppet the rescue cat.
:turkey:

:bat:

User avatar
lolotsung
Head Chicken
Posts: 1000
Joined: Thu Mar 18, 2021 3:18 am
Location: Caledon
x 858

Re: Good Morning 2025

Post by lolotsung » Tue Mar 25, 2025 11:33 pm

Is it typical to put an ammonia sensor in a coop? I am handy snd I built the frame of a 10x12 coop in two evenings with my brother. This time I think I will build something much smaller because it will take me less time than emptying my shed! :laugh:
0
:broodyhen: :chicks: :feed ducks: :iheartpto:

User avatar
Killerbunny
Poultry Guru - total zen level
Posts: 7975
Joined: Sat Dec 12, 2015 12:04 pm
Answers: 4
Location: Brockville
x 10287

Re: Good Morning 2025

Post by Killerbunny » Wed Mar 26, 2025 5:16 am

Oh hell no! Just DH is a bit of an electronics nut. The other thing is the insulated panels were built so that sections just bolt togeter. We find the insulation helps in summer! Will try to take some pics and post. These are no longer cheap LOL!
0
:iheartpto:
Beltsville Small White turkeys.
Mutt chickens for eggs
RIP Stephen the BSW Tom and my coffee companion.
RIP Lucky the Very Brave Splash Wyandotte rooster.
RIP little Muppet the rescue cat.
:turkey:

:bat:

User avatar
lolotsung
Head Chicken
Posts: 1000
Joined: Thu Mar 18, 2021 3:18 am
Location: Caledon
x 858

Re: Good Morning 2025

Post by lolotsung » Wed Mar 26, 2025 9:14 am

Panels that bolt together for easy moving?
0
:broodyhen: :chicks: :feed ducks: :iheartpto:

User avatar
Killerbunny
Poultry Guru - total zen level
Posts: 7975
Joined: Sat Dec 12, 2015 12:04 pm
Answers: 4
Location: Brockville
x 10287

Re: Good Morning 2025

Post by Killerbunny » Wed Mar 26, 2025 11:49 am

For easy construction but yes you could undo and move them sort of bolt together. Wll have to try to find the plans -they're on a computer somewhere.
0
:iheartpto:
Beltsville Small White turkeys.
Mutt chickens for eggs
RIP Stephen the BSW Tom and my coffee companion.
RIP Lucky the Very Brave Splash Wyandotte rooster.
RIP little Muppet the rescue cat.
:turkey:

:bat:

User avatar
lolotsung
Head Chicken
Posts: 1000
Joined: Thu Mar 18, 2021 3:18 am
Location: Caledon
x 858

Re: Good Morning 2025

Post by lolotsung » Tue Apr 01, 2025 10:17 pm

The CN flaggers on our project left to go up north because of the ice storm. How are PTOers doing? We (Caledon, Ontario) lost power but only for 1 day.
0
:broodyhen: :chicks: :feed ducks: :iheartpto:

User avatar
lolotsung
Head Chicken
Posts: 1000
Joined: Thu Mar 18, 2021 3:18 am
Location: Caledon
x 858

Re: Good Morning 2025

Post by lolotsung » Wed Apr 02, 2025 6:54 pm

Ontario Picnics
Ontario Picnics
20250402_184707.jpg
0
:broodyhen: :chicks: :feed ducks: :iheartpto:

Post Reply

Return to “Around the Waterer”