My Brooders

Have a novel idea for a piece of equipment? Or a re-purpose of an old piece of equipment?
User avatar
Flat Rock Farm
x 4839

My Brooders

Post by Flat Rock Farm » Fri May 06, 2016 9:31 pm

Great job as usual Al!! :wink:
1

User avatar
thegawd
Head Cockerel-Moderator
Posts: 3658
Joined: Mon Dec 07, 2015 10:30 pm
Answers: 1
Location: Port Lambton
x 3739

My Brooders

Post by thegawd » Mon May 09, 2016 10:27 am

I picked up some hitch pins for the locks on the doors... works perfect! I also built a 4 foot feeder out of a vinyl eavestrough, a steel stud and a piece of siding to keep the birds off of it. i drilled half inch holes on 1 Inch centers all across the front of the eavestrough so the feed can fall out into the trough. its put together with rivots, the trick with using rivots is simple, use 3 metal screws get the part placed exactly where you want it secured with 2 screws, use the third to pick where you want the first rivot, drill it in and strip the hole completly, remove the screw and insert your rivot. just continue piggy backing through the screws until your done. rivots are awesome, cheap fasteners!

Works amazing!
Screenshot_2016-05-08-19-52-05-460942296.png
Screenshot_2016-05-07-18-58-45527030805.png
Screenshot_2016-05-07-20-12-4589913518.png
Screenshot_2016-05-07-18-58-37762448095.png
Screenshot_2016-05-07-18-56-50-1522492762.png
Screenshot_2016-05-07-18-56-141977087728.png
3
Al

Home Grown Poultry

User avatar
Robbie
Head Chicken
Posts: 1390
Joined: Sat Dec 12, 2015 8:24 am
Answers: 1
Location: Cadmus, Ontario
x 867

My Brooders

Post by Robbie » Mon May 09, 2016 11:54 am

Fantastic!!!! Love it! Brilliant. And I see the beginning of a Whizbang under the trough LOL
1
:sFun_mornincoffee:

User avatar
thegawd
Head Cockerel-Moderator
Posts: 3658
Joined: Mon Dec 07, 2015 10:30 pm
Answers: 1
Location: Port Lambton
x 3739

My Brooders

Post by thegawd » Mon May 09, 2016 12:55 pm

thanks Robbie, that is my plucker, it works but its not perfect. I need a 3/4 hp motor.
1
Al

Home Grown Poultry

Seastar
Fuzzy Dinosaur Stage
Posts: 64
Joined: Thu Apr 07, 2016 10:41 am
Location: Watford
x 64

My Brooders

Post by Seastar » Mon May 09, 2016 2:01 pm

Nice setup. I will have to build a similar setup.
1

User avatar
Robbie
Head Chicken
Posts: 1390
Joined: Sat Dec 12, 2015 8:24 am
Answers: 1
Location: Cadmus, Ontario
x 867

My Brooders

Post by Robbie » Mon May 09, 2016 5:28 pm

thegawd wrote:QR_BBPOST thanks Robbie, that is my plucker, it works but its not perfect. I need a 3/4 hp motor.
You need a motor that big??? Ouch. I was toying with the idea of a bicycle driven one...... maybe not.
1
:sFun_mornincoffee:

Seastar
Fuzzy Dinosaur Stage
Posts: 64
Joined: Thu Apr 07, 2016 10:41 am
Location: Watford
x 64

My Brooders

Post by Seastar » Thu Jun 09, 2016 5:49 pm

I have been reviewing some older posts of items that you have built. Very impressive and well done. You shop two of my favourite stores, Princess and Restore.
John
1

User avatar
thegawd
Head Cockerel-Moderator
Posts: 3658
Joined: Mon Dec 07, 2015 10:30 pm
Answers: 1
Location: Port Lambton
x 3739

My Brooders

Post by thegawd » Thu Jun 09, 2016 9:02 pm

Thank you very much John! I figure I'v saved my self thousands just in poultry items... now I do this kinda stuff all the time, teaching my kids to do the same. just yesterday all my kids (6 of them) got new bikes. the oldest got a new one and all the bikes cycled down a kid. but each and everyone of them, with my help, fixed up, greased up and customized the "new" bikes just for them. they loved it but what I like the most is they will carry this on (I hope) into the future. I grew up being taught how to fix and build things myself. measure twice, cut once and do it right the first time. I take great pride in my work and just love teaching my kids to do the same.

Cheers!!!

:beer:
2
Al

Home Grown Poultry

Seastar
Fuzzy Dinosaur Stage
Posts: 64
Joined: Thu Apr 07, 2016 10:41 am
Location: Watford
x 64

My Brooders

Post by Seastar » Thu Jun 09, 2016 9:32 pm

Your doing a great job and have a fantastic philosophy . I'm at the stage where I measure 3 or 4 times, then walk through a door and cut something wrong. I screwed up on cutting roofing steel today but my son made a suggestion that fixes all.
John
2

User avatar
thegawd
Head Cockerel-Moderator
Posts: 3658
Joined: Mon Dec 07, 2015 10:30 pm
Answers: 1
Location: Port Lambton
x 3739

My Brooders

Post by thegawd » Thu Jun 09, 2016 9:43 pm

Thanks again. I hear ya on the numbers. I second guess myself and remeasure all the time. LOL did you see my Fort Coop thread? lots of second guessing and wrong cut boards there LOL. it turned out great though even though its not officially done. OH theres another thing... I have a handful of projects still needing to be completely finished like my plucker. I'll get there. Hey Ross can I have a round tuit? LOL
1
Al

Home Grown Poultry

Post Reply

Return to “Building Projects for Equipment”